Brother ADS-1000W - Manual (Page 12)

Configuring Your Machine for a Wireless Network
9
3
Confirm Your Network Environment
3
Connected to a Computer with a WLAN Access Point/Router in the Network
(Infrastructure Mode)
3
1 WLAN access point/router
1
1 If your computer supports Intel ® My WiFi Technology (MWT), you can use your computer as a Wi-Fi Protected Setup (WPS) supported access
point.
2 Wireless network machine (your machine)
3 Wireless capable computer connected to the WLAN access point/router
4 Wired computer which is not wireless capable connected to the WLAN access point/router with a
network cable
5 Mobile Device connected to the wireless access point/router
Configuration Method
3
The following instructions will offer methods for configuring your Brother machine in a wireless network
environment. Choose the method you prefer for your environment.
 Wireless configuration temporarily using a USB cable (Recommended)
See Temporarily Using a USB Cable (Recommended) on page 13.
 One push wireless configuration using WPS (Wi-Fi Protected Setup) or AOSS™
See Using WPS (Wi-Fi Protected Setup) or AOSS™ on page 19.
 PIN Method wireless configuration using WPS
See Using the PIN Method of Wi-Fi Protected Setup (WPS) on page 20.
2
5 1
4
3