Brother ADS-1000W - Manual (Page 27)

Configuring Your Machine for a Wireless Network
24
3
Configuration in Ad-hoc Mode
3
Using a configured SSID
3
If you are trying to pair the machine to a computer that is already in Ad-hoc mode with a configured SSID,
complete the following steps:
a Before configuring your machine, we recommend you write down your wireless network settings. You
will need this information before you continue with the configuration.
Check and record the current wireless network settings of the computer you are connecting with.
NOTE
The wireless network settings of the computer you are connecting with must be set to Ad-hoc mode with
an SSID already configured. For instructions on how to set your computer to Ad-hoc mode, see the
information included with your computer or contact your network administrator.
NOTE
Your Brother machine supports the use of the first WEP key only.
b Insert the supplied DVD-ROM into your DVD-ROM drive.
Network name: (SSID)
Communication Mode Encryption mode Network key
Ad-hoc NONE —
WEP
For example:
Network name: (SSID)
HELLO
Communication Mode Encryption mode Network key
Ad-hoc WEP 12345