beautypg.com

Brother ADS-1000W User Manual

Page 25

background image

Configuring Your Machine for a Wireless Network

22

3

(Windows

®

8)

Move your mouse to the lower right corner of your desktop. When the menu bar appears, click
Settings > Control Panel > Hardware and Sound > Devices and Printers > Add a device.

2 Choose the machine and click Next.
3 Enter the PIN displayed on the LCD in step f and then click Next.
4 Choose the network that you want to connect to, and then click Next.
5 Click Close.

d

If the machine is connected successfully, the WiFi light

on the Control Panel will light up.

(ADS-1500W/ADS-1600W)

a

Press

(Settings).

b

Press Network.

c

Press WLAN.

d

Press a or b to display WPS w/ PIN Code.
Press WPS w/ PIN Code.

e

When Enable WLAN? is displayed, press Yes to accept.
This will start the wireless setup wizard.
To cancel, press No.

f

The LCD will display an eight-digit PIN and the machine starts searching for an access point.

g

Using a computer connected to the network, type “http://access point’s IP address/” into your browser
(where "access point's IP address" is the IP address of the device that is used as the Registrar

1

).

1

The Registrar is normally the WLAN access point/router.

h

Go to the WPS setting page, type the PIN displayed on the LCD in step f into the Registrar, and follow
the on-screen instructions.

NOTE

The setting page is different, depending on the brand of access point/router you are using. See the
instruction manual supplied with your access point/router.

Windows Vista

®

/Windows

®

7/Windows

®

8

3

If you are using your computer as a Registrar, follow these steps:

NOTE

• To use a Windows Vista

®

, Windows

®

7, or Windows

®

8 computer as a Registrar, you need to register it

to your network in advance. See the instruction manual that came with your WLAN access point/router.

• If you use Windows

®

7 or Windows

®

8 as a Registrar, you can install the scanner driver after the wireless

configuration by following the on-screen instructions. If you want to install the full driver and software
package, follow the steps in the Quick Setup Guide for installation.

This manual is related to the following products: