Brother HL-L9200CDWT - Manual (Page 85)

Driver and Software
78
2
 Toner Save Mode
When you select the Toner Save Mode check box, print appears lighter. The default setting is Off
(unchecked).
NOTE
We do not recommend Toner Save Mode for printing Photo or grayscale images.
 Sleep Time [Min.]
When the machine does not receive data for a certain period of time, it enters Sleep mode. In Sleep mode,
the machine acts as though it were turned off. If you choose Printer Default, the timeout setting will be
reset to the specific time set at the factory; this can be altered in the driver. To change the Sleep Time,
choose 2, 10 or 30.
While the machine is in Sleep mode, the Touchscreen's backlight turns off, but the machine can still
receive data. Receiving a print job will wake up the machine to start printing.
 Color / Mono
You can change the Color/Mono settings in the printer driver as follows:
• Auto
The machine checks the content of the document for color. If color is detected anywhere in the
document, it will print the whole of the document using all the colors. In other words, it will mix some of
the toners to help achieve every shade detected in the document, increasing the density of toner
applied to the page. If no color content is detected, it will print the document in monochrome. The default
setting on your machine is Auto.
• Color
Whether the document contains color or just monochrome, your machine will print the document using
all the colors.
• Mono
Select this mode if the document has only black and grayscale text and objects. If your document
contains color, then selecting Mono means it will print the document in 256 levels of gray using only
the black toner.
NOTE
• The machine’s color sensor is very sensitive and may perceive faded black text or an off-white background
as color. If you know that your document is black and white and you want to conserve color toner, select
Mono mode.
• If either the Cyan, Magenta or Yellow toner reaches the end of its life while printing a color document, the
print job cannot be completed. You can cancel your print job and choose to start the print job again in
Mono mode, as long as Black toner is available.
 Color Mode
The following options are available in Color Matching mode:
• Normal
This is the Default color mode.
• Vivid
The color of all elements are adjusted to become a more vivid color.
• None