Brother HL-L9200CDWT - Manual (Page 20)

Printing Methods
13
1
c
Load paper in the MP tray, making sure:
 The paper stays under the maximum paper tab (1).
 The paper's leading edge (top of paper) is positioned between the and arrows (2).
 The side to be printed on must be face up with the leading edge in first.
 The paper guides touch the sides of the paper so it will feed properly.
NOTE
When you are using glossy paper, load only one sheet at a time in the MP tray to avoid a paper jam.
d
Lift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page
as soon as it comes out of the machine.
1
2