Brother HL-L9200CDWT - Manual (Page 100)

General Information
93
3
1 When Tray 2 is installed.
2 Tray 2 is standard on HL-L9200CDWT.
Level 1 Level 2 Options Descriptions
Paper Tray Tray Use Auto* / MP Only / Tray1 Only /
Tray2 Only
1
Select the tray that will be used.
Priority (Without Tray2 installed)
MP>T1* / T1>MP
(With Tray2 installed)
MP>T1>T2* / MP>T2>T1 /
T1>T2>MP / T2>T1>MP When Auto is chosen in Tray Use,
the machine chooses the order in
which it uses the paper trays that
contain paper of the same size.
2-sided On(Long Bind) / On(Short
Bind) / Off* Select whether to print on both sides
of the paper.
MP Size A4 / Letter* /B5(JIS) /
B5(ISO) / A5 / A5(Long Edge) /
A6 / Executive / Legal / Folio /
Com-10 / Monarch / C5 / DL /
3"x5" Select the size of paper you are
loading in the MP tray.
Tray1 Size A4 / Letter* /B5(JIS) / A5 /
A5(Long Edge) / A6 /
Executive / Legal / Folio Choose the size of paper you loaded
in the standard paper tray.
Tray2 Size
1 A4 / Letter* / B5(JIS) / A5 /
Executive / Legal / Folio Choose the size of paper you loaded
in the optional lower tray (Tray 2)
2 .
Check Size On* / Off Select whether to display the
message telling you to check that
the size of the paper in the machine
and the machine's Paper Size
setting match.
The factory settings are shown in Bold with an asterisk.