Brother HL-L9200CDWT - Manual (Page 101)

General Information
94
3
Level 1 Level 2 Level 3 Level 4 Options Descriptions
General
Setup Local Language - - English* /
Français... Select the Touchscreen
language for your
country.
Ecology Toner Save - On / Off* Increases the page
yield of the toner
cartridge.
Sleep Time - 0 / 1 / 2 / 3* / 4 /
5 / ... 50 min Set the time to return to
Power Save mode.
Quiet Mode - On / Off* Decreases printing
noise.
Auto Power Off - Off* / 1hour /
2hours /
4hours / 8hours Sets the number of
hours that the machine
will remain in Deep
Sleep mode before
going into Power Off
mode. Choose Off if
you do not want the
machine to go into
Power Off mode.
Panel Control LCD Settings Backlight Light* / Med /
Dark
Adjust the brightness of
the Touchscreen's
backlight.
Dim Timer Off* / 10sec /
20sec / 30sec
Set how long the
Touchscreen's
backlight stays on after
the last button press.
Setting Lock Set Password - - Stop unauthorized
users from changing the
machine’s settings.
Lock OffOn - -
Interface Select - Auto* / USB /
Network Choose the interface to
use.
If you select Auto, the
machine changes the
interface to USB or
Ethernet depending on
which interface is
receiving data.
Auto IF Time - 1 / 2 / 3 / 4 / 5* /
... / 99sec You must set the
time-out period for the
auto interface selection.
Input Buffer - Level 1 / 2 / 3 /
4* / ... / 7 Increases or decreases
the input buffer
capacity.
The factory settings are shown in Bold with an asterisk.