Brother HL-L9200CDWT - Manual (Page 129)

Options
122
4
e
Hold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot.
Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it locks into place (2).
f Put the metal (2) and then the plastic (1) SO-DIMM covers back on.
g Plug the machine’s power cord back into the AC power outlet first, and then connect the interface cables.
h
Turn on the machine’s power switch.
NOTE
To make sure that you have installed the SO-DIMM properly, you can print the Printer Settings page that
shows the current memory size, (see Machine Information on page 91.)
1 2
2
1