Brother MFC-9420CN - Manual (Page 64)

Receiving a fax
6 - 3
6
F/T Ring Time
(Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel,
you’ll need to decide how long the machine
will signal you with its special
pseudo/double-ring when you have a voice
call. (If it’s a fax call, the machine receives the
fax.)
This pseudo/double-ring happens after the
initial ringing from the phone company. Only
the machine rings and no other phones on the
same line will ring with the special
pseudo/double-ring. However, you can still
answer the call on any telephone on the same
line as the machine. (See For Fax/Tel mode
only on page 6-7.)
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 1, 2.
3
Press
▲ or ▼ to select how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds).
Press Menu/Set.
4
Press Stop/Exit.
Note
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.
Tray Use for Fax mode
If your machine does not have the optional
tray #2, this setting is not available. The
default setting of Auto allows your machine
to choose the paper from the optional Tray #2
if Tray #1 is out of paper or if incoming faxes
will fit best on the paper in Tray #2.
1
Press Menu/Set, 1, 0.
2
Press
▲ or ▼ to select
Tray#1 Only , Tray#2 Only or Auto.
Press Menu/Set.
3
Press Stop/Exit.
Setup Receive
2.F/T Ring Time
General Setup
0.Tray Use:Fax