Brother MFC-9420CN - Manual (Page 47)

Chapter 4
4 - 2
Changing the Setting Lock
password
1
Press Menu/Set, 1, 8, 2.
2
Press
▲ or ▼ to select Set Password.
Press Menu/Set.
3
Enter the registered four-digit password.
Press Menu/Set.
4
Enter a four-digit number for the new
password.
Press Menu/Set.
5
If the LCD shows Verify:, re-enter the
new password.
Press Menu/Set.
6
Press Stop/Exit.
Turning Setting Lock on
1
Press Menu/Set, 1, 8, 2.
2
Press
▲ or ▼ to select On.
Press Menu/Set.
3
Enter the registered four-digit password.
Press Menu/Set.
4
Press Stop/Exit.
Turning Setting Lock off
1
Press Menu/Set, 1, 8, 2.
2
Enter the registered four-digit password.
Press Menu/Set twice.
3
Press Stop/Exit.
Note
If you enter the wrong Password, the LCD
shows Wrong Password. The machine will
stay in Setting Lock mode until the registered
password is entered.
Security
2.Setting Lock
Security
2.Setting Lock