Brother MFC-9420CN - Manual (Page 35)

Chapter 2
2 - 11
1
Fan the pages well. Make sure you put
the documents face up, top edge first
in the ADF until you feel them touch the
feed roller.
2
Adjust the paper guides to fit the width of
your documents.
3
Unfold the ADF document output
support flap.
Using the scanner glass
You can use the scanner glass to fax, copy or
scan pages of a book or one page at a time.
Documents can be up to 8.5 in. (215.9 mm)
wide and 11 in. (297 mm) long.
Note
To use the scanner glass, the ADF must be
empty.
1
Lift the document cover.
2
Using the document guidelines on the
left, center the document face down on
the scanner glass.
3
Close the document cover.
CAUTION
DO NOT pull on the document while it is
feeding.
CAUTION
If the document is a book or is thick, do not
slam the cover or press on it.
Place documents Face Down on
the scanner glass.