Fusing unit, Replace fusing unit message, Replacing the fusing unit – Brother MFC-9420CN User Manual
Page 160: Cfusing unit

Troubleshooting and routine maintenance
C - 35
C
Fusing unit
Replace fusing unit message
When the following message appears on the
LCD, you must replace the fusing unit.
Replacing the fusing unit
1
Turn off the machine’s power switch. To
avoid injury, wait until the machine has
cooled down sufficiently before you
replace the fusing unit.
2
Open the back cover (1) and the
scanner unit (2) of the machine.
3
To release the fusing unit from the
machine, release the lock levers that are
on both sides of the fusing unit.
WARNING
The fusing unit and the parts around
it are hot! Be sure to wait until the
fusing unit has cooled down
sufficiently before replacing the
fusing unit. If you touch the hot
parts, you might get injured.
Replace Fuser
See also other documents in the category Brother Multifunction Devices:
- MFC 8480DN (229 pages)
- MFC 8480DN (228 pages)
- MFC 8480DN (249 pages)
- IntelliFax-2820 (159 pages)
- MFC-7340 (199 pages)
- IntelliFAX 4100e (1 page)
- IntelliFAX 4100e (156 pages)
- MFC 7840W (67 pages)
- MFC-7340 (32 pages)
- MFC-7340 (192 pages)
- MFC 8480DN (34 pages)
- IntelliFAX 4100e (25 pages)
- MFC 8890DW (46 pages)
- MFC 7840W (151 pages)
- MFC 7840W (52 pages)
- MFC 8480DN (10 pages)
- IntelliFAX 4100e (2 pages)
- IntelliFax-2820 (12 pages)
- IntelliFax-2820 (38 pages)
- MFC-7365DN (82 pages)
- MFC-7365DN (21 pages)
- MFC 7360N (162 pages)
- MFC 7860DW (42 pages)
- MFC-7365DN (76 pages)
- MFC-7365DN (162 pages)
- MFC 7360N (6 pages)
- MFC-7365DN (218 pages)
- DCP 8080DN (156 pages)
- DCP 8080DN (29 pages)
- DCP-8085DN (7 pages)
- DCP-8085DN (143 pages)
- DCP-8085DN (158 pages)
- MFC-J270W (34 pages)
- MFC-J270W (205 pages)
- MFC-J270W (122 pages)
- MFC-J270W (122 pages)
- MFC-J615W (14 pages)
- MFC-J270W (59 pages)
- MFC-J270W (15 pages)
- MFC-7225N (115 pages)
- MFC-7220 (2 pages)
- MFC-7225N (40 pages)
- MFC-7225N (16 pages)
- MFC-7225N (40 pages)
- MFC-7225N (56 pages)