Brother MFC-3100C - Manual (Page 91)

M A K I N G C O P I E S 11 - 4
BHLMFC-US-MFC3100C-FM5.5
Using the Options Key
Use the Options key to set number of copies, paper type, paper size,
brightness, enlargement/reduction ratio and special copy options for the next
copy only.
Paper Type
You can change the paper type setting for the next copy only.
1 Place the original face down in the ADF.
2 Use the dial pad to enter the number of copies you want (up to 99).
3 Press Options and press to select OPT:PAPER TYPE , and then press
Menu/Set.
4 Press to select the type of paper you are using ( PLAIN , INKJET ,
GLOSSY or TRANSPARENCY ), and then press Menu/Set.
5 If you selected GLOSSY , press to select 4-COLOR or 3-COLOR , and
then press Menu/Set.
6 Press Black Copy or Color Copy—OR—Press for additional settings.
Press
Options
Menu Selections Options
Factory
Setting
OPT:#OF
COPIES01 NO. OF COPIES:XX 01
OPT:PAPER TYPE PLAIN / INK JET / GLOSSY
( 4-COLOR or 3-COLOR )/
TRANSPARENCY
PLAIN
OPT:PAPER SIZE LETTER / LEGAL / A4 /
POST CARD : 4" × 6"
LETTER
OPT:BRIGHTNESS - + - +
OPT:ELG / RDC 50% / 78% LGL > LTR /
94% A4 > LTR/100% /
104% EXE > LTR/150% /
200% / ZOOM
100%
OPT:SPECIAL 2 IN 1 */ OFF
*(Black and White only)
OFF
Note
The print quality of black ink varies depending on the kind of glossy paper you
are using. Black ink is used when you select
4-COLOR . If the glossy paper you
are using repels the black ink, select 3-COLOR , which simulates black ink by
combining the three ink colors.
or
or
or
or