Brother MFC-3100C - Manual (Page 165)

U S I N G T H E B R O T H E R M F C W I T H A N E W P O W E R M A C I N T O S H ® G 3 , G 4 O R I M A C ™ / I B O O K ™ 18 - 8
BHLMFC-US-MFC3100C-FM5.5
Accessing the Scanner
Run your PaperPort ® software. You will see the PaperPort ® icon in the upper
right hand corner of your screen. The first time you use the Brother TWAIN
driver, set it as the default by choosing the Select Source, then click the
PaperPort
® icon. Afterward, for each original you scan choose Acquire Image
by clicking the PaperPort ® icon. The Scanner setup dialog box will appear.
Scanning a Document into Your Macintosh G3, G4 or
iMac
1 Place the original in the ADF.
2 Adjust the following settings, if needed, in the scanner setup dialog box:
Resolution
Color Type
Brightness
Contrast
Scanning Area
3 Click Start.
When scanning is finished, the image will appear in your graphics application.