Brother MFC-3100C - Manual (Page 172)

19 - 2 I M P O R T A N T I N F O R M A T I O N
BHLMFC-US-MFC3100C-FM5.5
If you experience trouble with your MFC-3100C, please contact a Brother
Authorized Service Center for information on obtaining service or repair. The
telephone company may ask that you disconnect this equipment from the line
until the problem has been corrected or until you are sure that the equipment is
not malfunctioning.
If you are not able to solve a problem with your MFC, contact Brother Customer
Service. (See
Brother Numbers , page i.)
WARNING
For protection against the risk of electrical shock, always disconnect all cables
from the wall outlet before servicing, modifying or installing the equipment.
This equipment may not be used on coin service lines provided by the
telephone company or connected to party lines.
Brother cannot accept any financial or other responsibilities that may be the
result of your use of this information, including direct, special or consequential
damages. There are no warranties extended or granted by this document.
WARNING
Important—About the Interface Cable
This machine has been certified to comply with FCC standards, which are
applied to the USA only. The filter core supplied with your MFC should be
attached to the shielded interface cable according to FCC 15,27 (a). In addition,
a grounded plug should be plugged into a grounded AC outlet after checking
the rating of the local power supply for the printer to operate properly and
safely.
Federal Communications Commission (FCC)
Declaration of Conformity (For USA Only)
declares, that the products
Product Name: MFC-3100C
comply with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Responsible
Party: Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911 USA
TEL: (908) 704-1700