Brother MFC-3100C - Manual (Page 53)

I N I T I A L S E T U P 5 - 1
5
BHLMFC-US-MFC3100C-FM5.5
5
Initial Setup
Getting Started
Setting Paper Type
You can choose the Paper Type you use.
1 Press Menu/Set, 1, 1.
2 Press to select PLAIN , INK JET ,
GLOSSY or TRNSPRNCY (TRANSPARENCY), and then press Menu/Set.
3 If you selected GLOSSY , press to select GLOSSY:4-COLOR or
GLOSSY:3-COLOR , and then press Menu/Set.
4 Press Stop/Exit.
Setting Paper Size
You can use three sizes of paper for printing your faxes and copies — letter,
legal and A4. When you change the kind of paper you have loaded in the MFC,
you will need to change the setting for Paper Size so your MFC can fit the
incoming fax on the page.
1 Press Menu/Set, 1, 2.
2 Press to select LETTER , LEGAL
or A4 , and then press Menu/Set.
3 Press Stop/Exit.
Note
The print quality of black ink varies depending on the kind of glossy paper you
are using. Black ink is used when you select
GLOSSY:4-COLOR . If the
glossy paper you are using repels the black ink, select GLOSSY:3-COLOR ,
which simulates black ink by combining the three ink colors.
Note
The MFC ejects paper with printed surfaces face up onto the paper tray in the
front of the MFC. When you use transparencies, remove each sheet
immediately, to prevent a paper jam or curled.
1 . P A P E R T Y P E
or
or
2 . P A P E R S I Z E
or