Remote fax options (not available for color fax), Fax forwarding/paging, Programming a fax forwarding number – Brother MFC-3100C User Manual
Page 81: Programming paging number, Remote fax options
R E M O T E F A X O P T I O N S ( N O T A V A I L A B L E F O R C O L O R F A X )
9 - 1
9
BHLMFC-US-MFC3100C-FM5.5
9
Remote Fax Options
(Not Available for Color Fax)
Fax Forwarding/Paging
Programming a Fax Forwarding Number
When Fax Forwarding is set to
ON
, your MFC stores the received fax in
memory. Then it dials the fax number you’ve programmed and forwards the fax
message.
1
Press Menu/Set, 2, 5, 1.
2
Press
until the LCD shows
FAX FORWARD?
, and then press
Menu/Set.
3
The LCD prompts you to enter the fax
number where faxes will be forwarded.
Enter the forwarding number (up to 20
digits), and then press Menu/Set.
4
Press Stop/Exit.
Programming Paging Number
When Paging is selected, your MFC dials the pager number you’ve programmed,
and then dials your Personal Identification Number (PIN); this activates your
pager so you will know that you have a fax message in the memory.
1
Press Menu/Set, 2, 5, 1.
2
Press
until the LCD shows
PAGING?
, and then press Menu/Set.
3
Enter your pager phone number (up to 20
digits) followed by # #, and then press
Menu/Set. Do not include the area code
if it is the same as that of your MFC.
For example, 1 8 0 0 5 5 5 1 2 3 4 # #.
You cannot use Paging and Fax Forwarding at the same time.
You cannot use Paging and Fax Forwarding when Fax Storage is set to
OFF
.
1 . F A X F W D / P A G I N G
or
F W D # :
1 . F A X F W D / P A G I N G
or
P A G # :