TOHO ELECTRONICS TTM-509 - Manual (Page 50)

TOHO TOHO ELECTRONICS INC.
DWG. No.
45-4199-E
PAGE
50/66
4.4.6 OUT 1 to 6 setting mode
Character
PV screen
Auxiliary screen Designation Description Initial value
1 □
□□□□
to
□
□□□□ Select OUT 1 to
OUT 6 Setting concerning outputs 1 to 6
2 □

to
□
 Set an OUT 1
function to OUT 6
function Output connection channel
: Connect it to CH1
: Connect it to CH2 (displayed when CH2 is
available)
Type of output connection port
: Connect it to the main output (an open signal
in the case of potentiometer input)
: Connect it to the auxiliary output (a closed
signal in the case of potentiometer input)
: Connect it to the event
: Connect it to transmission (displayed when the
output is analog)
* For open and close signals for the position
proportional control with a potentiometer, set the
output connection channel to 2CH.
* This has no transmission functions in  and
.
In the case of
509-0N
_O1F/_O2F
/
_O3F/_O6F

In the case of
509-00
_O1F/_O2F
/
_O3F/_O6F

3 □

to
□
 Set a function for
event output 1 to 6
(PV event) Display color switchover
: The PV display color remains unchanged
even if the PV event is turned on.
: The PV display color changes if the PV
event is turned on.
Additional functions
: Disabled
: Hold
: Standby sequence
: Hold + standby sequence
PV event functions
: Disabled
: Deviation upper and lower limit
: Deviation upper limit
: Deviation lower limit
: Deviation range
: Upper and lower limit
: Upper limit
: Lower limit
: Range
: Connect to timer
