TOHO ELECTRONICS TTM-509 User Manual
Page 44
TOHO
TOHO ELECTRONICS INC.
DWG. No.
45-4199-E
PAGE
44/66
4.4.5 Control setting mode
Character
PV screen
Auxiliary screen
Designation
Description
Initial value
1
□
□□□□
Select control
setting
Setting concerning control
2
□
(□/
□
)
Select a control
setting channel
3
ch
Set an upper limit
for the SV limiter
Setting range: lower limit to the upper limit for the SV
setting range
In the case of analog input, increasing the span does not
increase resolution to 30,000 or more. (Measurements
will become discrete.)
Multi-input
4-wire type
4
ch
Set a lower limit
for the SV limiter
Setting range: lower limit to the upper limit for the SV
setting range
Multi-input
4-wire type
5
Set an upper limit
for cascade scaling
Setting range: lower limit to the lower limit for the SV
setting range
Multi-input
4-wire type
6
Set a lower limit
for cascade scaling
Setting range: lower limit to the lower limit for the SV
setting range
Multi-input
4-wire type
7
Set the SVs for
cascade AT
Setting range: to
8
□
Set an upper limit
for remote scaling
Setting range: lower limit to the lower limit for the SV
setting range
Multi-input
4-wire type
9
□
Set a lower limit
for remote scaling
Setting range: lower limit to the lower limit for the SV
setting range
Multi-input
4-wire type
10
Adjust feedback
resistance when
fully closed
This adjusts feedback resistance when fully closed.
When the valves and/or other components are fully
closed, press the ENTER key (for storage).
11
□
Adjust feedback
resistance when
fully open
This adjusts feedback resistance when fully opened.
When the valves and/or other components are fully
opened, press the ENTER key (for storage).
12 □ch
Set the control
mode
This serves in setting the control mode.
: Executes control.
: Stops control (to output the lower limit in the
operation limiter)
: Manual control