beautypg.com

Appendix a: operation, How to apply power to the system – American Power Conversion PDU User Manual

Page 47

background image

150kW InfraStruXure System—Installation and Start-Up

39

Appendix A: Operation

How to Apply Power to the System

This procedure instructs on how to apply power to a system that has already been installed. For initial
start-up instructions, see “Start-Up Procedure” on page 33 of this manual.

1. Close (turn ON) the main circuit breaker of

the power source supplying power to the
PDU.

2. Set the Main Input on the PDU to ON.

3. Power the PDU distribution circuit breakers.:

a. Set theMain Output circuit breaker on the

PDU to ON.

Note

After the Main Output breaker has been closed, both PDU distribution panels will be
energized.

See also other documents in the category American Power Conversion Tools: