Acura 2010 TSX - Manual (Page 87)

You can customize some of the
vehicle control settings to your
preference. Here are the settings
you can customize:
METER SETUP
LIGHTING SETUP
When you want to change the
vehicle control settings, press the
INFO (
/ ) button to select CHG
SETTING, then press the SEL/
RESET button.
DOOR SETUP
Each time you press the INFO ( /
) button, the screen changes as
shown on the next page. Press the
INFO (
/ ) button until you see
the setup you want to customize,
then press the SEL/RESET button
to enter your selection.
If you do not make any changes,
select ‘‘EXIT.’’ The display returns to
the normal display.
If you want the settings as they were
when the vehicle left the factory,
select DEFAULT ALL, as described
on page
.
POSITION SETUP
108
: All models except Canadian
TSX with 4-cylinder engine
Customize Settings
Multi-Information Display
84
2010 TSX