Acura 2010 TSX - Manual (Page 417)

The component parts in the engine
compartment are protected by
several covers. You may need to
remove the covers when you
perform some simple maintenance
work.
To remove the covers:
Remove the holding clip(s).
Remove the right and left engine
compartment covers by pulling up.
Pull the bulkhead cover straight
up to remove.
After replacing the right engine
compartment cover, make sure the
washer fluid cap is firmly in place.
When reinstalling the covers, make
sure the pins and tabs are in their
proper positions, and put the holding
clip(s) back in place securely.
1.
2.
3.
Engine Compartment Covers
6-cylinder models only
414
RIGHT ENGINE COMPARTMENT COVER
BULKHEAD COVER LEFT ENGINE COMPARTMENT COVER
2010 TSX