Acura 2010 TSX - Manual (Page 444)

If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air dry before
you use the vehicle.
Dirt build-up around the openings of
the seat belt anchors can cause the
belts to retract slowly. Wipe the
openings with a clean cloth
dampened in mild soap and warm
water or isopropyl alcohol.
When cleaning or replacing, turn the
knob counterclockwise to unhook
the floor mat.
The driver’s floor mat that came
with your vehicle hooks over the
floor mat anchors. To lock each
anchor, turn the knob clockwise.
This keeps the floor mat from sliding
forward and possibly interfering with
the pedals.
CONTINUED
Floor Mats Cleaning the Seat Belts
Cleaning the Seat Belts, Floor Mats
Ma
int
e
na
nce
441
Driver’s floor mat is shown.
OPENING
To unlock
2010 TSX