Acura 2010 TSX - Manual (Page 151)

Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
before closing it.
When you push the main switch in,
the indicator comes on and the
passengers’ windows cannot be
raised or lowered. Use the main
switch when you have children in the
vehicle so they do not injure
themselves by operating the
windows unintentionally. To cancel
this feature, push on the switch
again. The switch will pop out and
the indicator will go off.
The windows and the main switch
feature will operate for up to 10
minutes after you turn off the
ignition switch. Opening either front
door cancels this function.
The driver’s window auto
reverse function is disabled when
you continuously pull up the switch.
The indicators inside the window
switches come on when the light
control switch is in either
or
position.
If either front
window senses any obstacle while it
is closing automatically, it will
reverse direction and then stop. To
close the window, remove the
obstacle, then use the window switch
again.
Power Windows
AUTO REVERSE
148
NOTE:
2010 TSX