Acura 2010 TSX - Manual (Page 130)

When you unlock the driver’s door
with your remote transmitter, each
remote transmitter activates the
customized settings related to that
remote.
Press and hold this
button for about 1 second to attract
attention; the horn will sound, and
the exterior lights will flash for about
30 seconds. To cancel panic mode,
press any other button on the remote
transmitter, or turn the ignition
switch to the ON (II) position. Panic
mode does not work when the key is
in the ignition switch.
Press and hold this
button for about 1 second to open
the trunk. You cannot open the trunk
if the key is in the ignition switch.
The driving position memory
activated (Driver 1, Driver 2) is
shown on the back of each
transmitter. Make sure you store
your desired driving position in the
memory that is activated by the
transmitter you normally carry.
Here are the settings activated with
the remote:
Customized settings
(see page
).
Driving position memory
(see page
).
When you unlock and open the
driver’s door with the remote
transmitter, the driver’s seat moves
to the position stored in memory.
You will hear two beeps when the
movement is completed. The
indicator in the related memory
button on the driver’s door remains
on.
81
142
CONTINUED
All models except Canadian TSX with
4-cylinder engine
Recalling a Memorized Driving
Position PANIC
TRUNK
Remote Transmitter
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
127
With Driver 2 With Driver 1
2010 TSX