Acura 2010 TSX - Manual (Page 230)

To switch the PS name display
function on and off, press and
release the TITLE button. With the
system on, you will see the ‘‘PS ON’’
message on the center display. If the
station you are listening to is an RDS
station, the displayed frequency
switches to the station name.
On the FM band, you can select a
favorite station and display the
program service name provided by
the radio data system (RDS).
You will see ‘‘0’’ displayed if auto
select cannot find a strong station for
every preset button.
You can also press the A.SEL side of
the SCAN/A.SEL bar. You will see
A.SEL on the screen, and the system
goes into scan mode for several
seconds. The system stores the
frequencies of six AM and twelve
FM stations in the preset buttons.
press ENTER
on the interface selector.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons (icons) as previously
described.
For information on FM/AM radio
frequencies and reception, see page
.
, press the
A. SEL side of the bar. This restores
the presets you originally set.
The program service name display
function shows the name of the
station you are listening to. You can
turn this function on or off.
285 CONTINUED
To turn off auto select,
To turn off auto select
Radio Data System (RDS)
Playing the FM/AM Radio (Models with navigation system)
Program Service (PS) Name Display
Fe
a
tu
re
s
227
PS ON MESSAGE
2010 TSX