Acura 2010 TSX - Manual (Page 73)

The multi-information display in the
instrument panel displays various
information and messages when the
ignition switch is in the ON (II)
position. Some of the messages help
you operate your vehicle more
comfortably. Others help to keep
you aware of the periodic
maintenance your vehicle needs for
continued trouble-free driving.
There are three types of messages:
normal display messages, engine oil
life and maintenance messages, and
system messages.
You can select the displayed
language and also customize some
vehicle control settings to your liking
with the multi-information display
and the three buttons on the steering
wheel (see page
).
If you do not fasten your seat belt,
you will see a ‘‘FASTEN SEAT
BELT’’ message on the multi-
information display when you turn
the ignition switch to the ON (II)
position.
These messages go off several
seconds after the key is inserted into
the ignition switch.
When you unlock and open the
driver’s door, the display shows
‘‘DRIVER 1’’ or ‘‘DRIVER 2’’
depending on which remote
transmitter you use.
The driver’s seat moves to the
position stored in that remote
transmitter (see page
).
71
142
All models except Canadian TSX with
4-cylinder engine
Normal Display Messages
Multi-Information Display
70
Remote transmitter 1 is used.
Remote transmitter 2 is used.
2010 TSX