Acura 2010 TSX - Manual (Page 382)

CONTINUED
When you move the shift lever from
‘‘D’’ to ‘‘S’’ position and pull either
paddle shifter, the gear position
indicator displays ‘‘M’’ along with the
selected gear number.
To upshift, pull the (right) paddle
shifter. To downshift, pull the
(left) paddle shifter.
With the shift lever in the S position,
you can manually shift up or down
with the paddle shifters. The
transmission goes into the sequential
shift mode and holds the selected
gear.
To enter the sequential shift mode,
press the release button on the front
of the shift lever, move the lever to
the S position, then pull either paddle
shifter. To return to drive mode (D),
move the shift lever to the D position.
While you are driving in the
sequential shift mode, the
transmission will not automatically
return to drive mode (D).
The transmission downshifts to first
gear and returns to drive mode (D)
when the vehicle comes to a
complete stop or the vehicle speed is
about 6 mph (10 km/h).
If there is a problem in the
transmission while you are driving
with the paddle shifters, the D
indicator flashes, the D-paddle shift
mode is canceled, and the
transmission returns to drive mode
(D).
You upshift before the engine
speed reaches the lowest
threshold of the higher gear.
You pull both paddle shifters at
the same time.
Driving with the Paddle Shifters
Using the Paddle Shif ters in the S
position (Sequential Shif t Mode)
D
riv
ing
379
‘‘M’’ INDICATOR
GEAR POSITION INDICATOR
2010 TSX