Lights, 2010 tsx – Acura 2010 TSX User Manual
Page 442
![background image](/manuals/37350/442/background.png)
Remove the three holding clips
with a flat-tip screwdriver.
Pull down the under cover from
the bumper carefully.
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
The fog lights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
trunk or pull a trailer, readjustment
may be required. Adjustment should
be done by your dealer or another
qualified technician.
1.
2.
If equipped
CONTINUED
Replacing a Fog Light Bulb
Lights
Ma
int
e
na
nce
439
HOLDING CLIPS
UNDER COVER
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.
2010 TSX