Acura 2010 TSX - Manual (Page 252)

You can select any type of repeat and
random modes by using the
interface dial.
Push the AUDIO button to display
the audio information on the screen,
then scroll down by pushing down
the selector to select the audio menu.
If you don’t, the system advances to
the next track, plays about 10
seconds of it, and continues through
the rest of the tracks the same way.
To exit the track list display, press
the AUDIO button, or push the
interface selector to the left, or press
the cancel button.
When you press the SCAN side of
the SCAN/A. SEL bar or scroll down
and push the interface selector to
the left, the next track of the current
track plays for about 10 seconds.
You will see SCAN next to TRACK
on the screen and center display. To
listen to the rest of the track, press
and hold the SCAN side of the bar
until you hear a beep or push the
interface selector to the left again
within 10 seconds.
When you press the SCAN side of
the SCAN/A. SEL bar repeatedly
until you see SCAN in the center
display and the disc number begins
to blink, or push the interface
selector to the right, the first track of
the current disc plays for about 10
seconds. You will see SCAN next to
DISC on the screen. The disc
number is blinking and SCAN is also
shown in the center display. To listen
to the rest of the disc, press and hold
the SCAN side of the bar until you
hear a beep, or push the interface
selector to the right again within 10
seconds.
If you don’t, the system advances to
the next disc, plays about 10 seconds
of its first track, and continues
through the rest of the discs the
same way. When the system reaches
the last disc, DISC SCAN is canceled,
and that disc continues to play.
CONTINUED
Playing Discs (Models with navigation system)
To Select Repeat or Random
Mode: Disc Scan
Track Scan
Fe
a
tu
re
s
249
Push down the selector.
2010 TSX