Acura 2010 TSX - Manual (Page 436)

Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the headlights to test the
new bulb.
Reinstall the coolant reserve tank.
Remove the electrical connector
from the bulb by pushing on the
tab to unlock it, then slide the
connector off the bulb. Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Reinstall the air intake duct cover,
then reinstall the fasteners.
Reinstall the cover and upper part
of the air intake duct securely.
Reinstall the fasteners.
4. 5.
6.
7.
8.
9. On the passenger’s side
On the driver’s side
4-cylinder models:
6-cylinder models:
Lights
Ma
int
e
na
nce
433
4-cylinder models 6-cylinder models
2010 TSX