beautypg.com

Lights – Acura 2010 TSX User Manual

Page 440

background image

Remove the socket by turning it
one-quarter turn counterclockwise.

Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.

Turn on the lights to make sure
the new bulb is working.

Reinstall the trunk lid lining. Make
sure it is installed under the edge
of the trunk seal.

Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.

Install the fasteners.

Each outside mirror has side turn
signal lights. The lights should be
replaced by your dealer.

The license plate has two lights
above it. The bulbs should be
replaced by your dealer.

4.

5.

6.

7.

8.

9.

Lights

Side Turn Signal Lights

Rear License Plate Light Bulbs

Ma

int
e

na
nce

437

SOCKET

2010 TSX

This manual is related to the following products: