ROTRONIC MBW 373 - Manual (Page 8)

4
Data Lines
The first five lines of the display are for numeric or graphic representation of the measured data.
We refer to those first five lines as data lines.
9.50 Relative Humidity
% If numeric, a data line contains the value to the
left, with the parameter description and units to
the right.
-9.65 Time Span 20.16.30 -10.2 Time Span 00:30:00
-9.8 If graphic, a data line shows a simple graph of
the data over time.
The choice of which parameter is shown on which data line, as well as whether a data line is
viewed as numeric or graphic, is easily selectable. You’ll see how to make these selections
shortly.
Status Line
Flow Rate
60
30
0
STABLE
Balance
Indicator
+
-
Frost
Density
Hi
0
Mirror
Residue
Hi
0
Near the bottom of the display is the status
line. The status line contains balance, density,
contamination, and flow rate indicators. The
position and configuration of the status line
never changes.
Fixed Function Keys
Pre
Cooler
Pump Dew/Frost
Control
Heater Mirror
Cleaning
Mirror
Check
The bottom line of the display contains a row of
fixed function keys. You’ll use these keys to
start and stop the pump, enable and disable
measurement of dew point, and other things.
The function of each of these keys never
changes, and they are always available for
use.
Menu Keys
To the right side of the display is a column of
menu keys. Each of these keys changes
function as needed.
Notice that the bottom key in this column is
different from the rest. The bottom key is used
to cycle the upper keys through the various
menu options. The text on the bottom key
changes to indicate the currently selected
menu option. The text of the upper keys
change based on the functions available in the
menu.
Use
this key
to
change
menus