ROTRONIC MBW 373 - Manual (Page 36)

32
Rack Mounting
Rack mounting kits are available for all 373 models. For 373LX models, simply remove the
unit from it’s current rack mount housing and reinstall it into the rack of your choice. Due to
it’s weight, you should support it on the sides or rear with rack guides that should be available
from the supplier of your rack system. For all other models, rack mount adapters are
available. Consult the factory for pricing and availability. Also note that for all models, front
and rear ventilation access is required.
Preparation for Shipping or Transportation
All shipping and transportation should be done in suitable padded containers. A heavy duty
container with at least 2 to 4 inches of clearance for foam padding is recommended.
Due to the design of the 373 systems, any shipping carton used should be constructed to
provide support only on the top and bottom of the side panels and on the front and rear frame
of the unit. Try not to have any load bearing directly on the face, nor on the top or bottom
center of the front or rear frame. Reusable shipping containers are available. Please contact
the factory for pricing and availability.
Prior to shipping, always cap the gas inlet and outlet fittings to prevent excess moisture
and/or contamination from entering the gas path, and to prevent damage to the fittings.
If applicable, drain the system of any cooling water, or cap the cooling water fittings.
Ensure the optical head assembly and cover screw are firmly attached.