ROTRONIC MBW 373 - Manual (Page 42)

38
Mirror Cleaning Preparation
Syntax Function
MinHeadRemovalTemp[=n][?]
Head and inner cooler are warmed above this temp
when Mirror Cleaning button has been pressed
prior to head removal, °C
SaveCfg=373 Save these and other configuration parameters
Automatic Mirror Check
Syntax Function
AMC.on[=i][?]
1 enables AMC, 0 disables AMC
AMC.cycleTime[=n][?] AMC cycle time in minutes
AMC.heatTime[=n][?] Time in mins to hold at high temperature during
Manual or Automatic Mirror Check
AMC.temp[=n][?] Temperature to heat to during Manual or Automatic
Mirror Check, °C
AMC.dispHold[=i][?] 1 freezes DP display during Manual or Automatic
Mirror Check
SaveCfg=373 Save these and other configuration parameters
Pump Control Parameters (if available)
Syntax Function
Pump.on[=i][?]
1 Æpump On, 0Æpump Off
Pump.freq[=n][?] Pump solenoid frequency, Hz
Pump.dutyCycle[=n][?] Pump solenoid on/off duty cycle
SaveCfg=373 Save these and other configuration parameters
Head Heater Control
Syntax Function
HeadHtrPID.on[=i][?]
1 Æhead heater On, 0Æhead heater Off
HeadHtrPID.setPt? Current head temp setpoint, °C
HeadHtrPID.fixedSetPt[=n][?] Setpoint for fixed mode control, °C
HeadHtrPID.deltaSetPt[=n][?] Setpoint for delta mode control, °C
HeadHtrPID.fixedOn[=i][?] 1 Æfixed mode control enabled, 0Ædisabled
HeadHtrPID.deltaOn[=i][?] 1 Ædelta mode control enabled, 0Ædisabled
SavePID=373 Save these and other PID parameters
External Hose Heater Control
Syntax Function
ExtHtrPID.on[=i][?]
1 Æexternal hose heater On, 0Æheater Off
ExtHtrPID.setPt? Current external hose temp setpoint, °C
ExtHtrPID.fixedSetPt[=n][?] Setpoint for fixed mode control, °C
ExtHtrPID.deltaSetPt[=n][?] Setpoint for delta mode control, °C
ExtHtrPID.fixedOn[=i][?] 1 Æfixed mode control enabled, 0Ædisabled
ExtHtrPID.deltaOn[=i][?] 1 Ædelta mode control enabled, 0Ædisabled
SavePID=373 Save these and other PID parameters