Avaya 4621SW IP - Manual (Page 77)

Issue 2.2 April 2005 77
Chapter 7: Headsets and Handsets
Introduction
This chapter provides information about headsets and specialized handsets that are compatible
with your IP telephone.
Headsets for 4600 Series IP Telephones
Avaya supports only those headsets and headset adapters that carry an Avaya brand or logo.
There are a variety of Avaya headsets that are compatible with your 4600 Series IP Telephone.
To see the available headsets, go to
http://www.avayaheadsets.com/index.html .
Headsets require headset adapters/connectors to operate. Avaya offers three types of headset
adapters for 4600 Series IP Terminals:
●
The MIP-1 provides remote call answering and call initialization features with the Avaya
Cordless Headset.
●
The Modular base amplifier (M12LUCM), which is a high-performance solution for users
who continuously wear headsets, and
● The HIP cord, which allows basic, direct headset connection to your Avaya IP Telephone.
Avaya also offers a cordless headset solution (LKA10) with up to a 150 ft. mobile range from the
base. The LKA10, when used with the MIP-1, offers remote call answering and call initialization
features on the 4610SW, 4620, 4620SW/4621SW and 4630SW IP Telephones. The MIP-1
must be ordered separately. The LKA10, when used without the MIP-1, operates with other
Avaya IP Telephones, but cannot be used for remote call answering or call initialization.
The table below summarizes Avaya’s corded headset connectors and cordless headset
choices, and provides ordering codes.
Headset Connector Type Ordering Code
M12LUCM Corded 407639715
HIP Cord Corded 700212442
LKA10 (includes Headset) Cordless Solution 408271385
MIP-1 Accessory 700281074