Avaya 4621SW IP - Manual (Page 75)

Selecting an Alternate Language
Issue 2.2 April 2005 75
Selecting an Alternate Language
Users can change the user interface language their 4620/4620SW/4621SW IP Telephones
display. The specific languages supported depend on the telephone model (4620 or 4620SW/
4621SW) and its software.
The 4620 IP Telephone always supports the following languages:
●
English (the default display language)
● Français
●
Italiano
● Japanese (Katakana only)
● Español
●
Deutsch
● Nederlands
● Português
A given 4620SW/4621SW IP Telephone supports one of three language configurations:
● The same configuration as the 4620 IP Telephone
●
English, Chinese, Russian, and Hebrew
● English, Japanese (Katakana and Han characters), Russian, and Hebrew
The Language Selection screen identifies which configuration applies to your 4620SW/4621SW
telephone.
1. Select Select display language on the second Options Main screen.
The Language Selection screen displays.
2. Select the Line/Feature button next to the language you want your phone to display when in
use.
If the currently active language was selected, the second Options Main screen re-displays
and no action is taken.
If any language other than the currently active language was selected, the Language
Confirmation screen displays. The prompt “Are you sure?” displays in the currently active
language and in the new language you selected. The four softkeys at the bottom of the
display are labeled respectively “Yes” and “No” in both the currently active language and the
selected new language.