Avaya 4621SW IP - Manual (Page 61)

Personal Ringing Options
Issue 2.2 April 2005 61
Call Log Enabled (active) is the default. For privacy purposes, you can change the status to
Disabled, to stop call logging and delete any calls currently logged.
1. To change this option, press the corresponding Line/Feature button.
2. Press the Line/Feature button for the next setting you want to change or save this setting by
pressing the Save softkey. (To restore the previous setting without making a change, press
the Cancel softkey.)
Upon saving or cancelling, the first Options Main screen displays. If you changed the status
from “Disabled” to “Enabled” all incoming and outgoing calls will now be logged. If you
changed the status from Enabled to Disabled, all calls from each Call Log are deleted and
future incoming/outgoing calls are not logged.
Personal Ringing Options
Your 4620/4620SW/4621SW IP Telephone has eight ringing pattern options. You can hear the
patterns and select the one you prefer using the Personal Ringing option.
You select this option from the Options Main screen, accessed by pressing the phone’s Option
button.
1. To hear a ring pattern, press the Line/Feature button to the left or right of any numbered
pattern.
The Current Pattern number changes to the selected pattern, which rings once.
2. Repeat Step 1 until your preferred pattern appears as the Current Pattern.
3. Save the setting by pressing the Save softkey or to restore the previous setting without
making a change, press the Cancel softkey.
The first Options Main screen displays.
Note:
Note:
Going off-hook, receiving a call, or losing power during ring pattern selection
interrupts the process, and you must start over from Step 1.
Adjust the ringer volume using the Volume Control buttons, as discussed in
Table 1: 4620/4620SW/4621SW IP Telephone Button/Feature Descriptions .