NORD Drivesystems MI0700 - Manual (Page 59)

3 Power and control terminal connection
MI 0700 GB-0414 59
SK 700E
Name
Function
[factory setting]
SK 5xxE
Customer unit
SK CU1-MLT-
20mA
Part No.
Connector
Terminal No.
Name
Terminal strip
Terminal No.
Name
SK 5xxE
onboard
Part No.
DIP
left
Analogue input 1
DIP top
ON = current
OFF = voltage
[Default = OFF]
Activatable 250 Ω
load resistor for
0/4…20 mA
left = I (current)
right = V (volt.)
[Default = V]
DIP
right DIP
bottom
Analogue input 2
* Meaning see table / page 54.
** Meaning see table / page 57.
*** Meaning see table / page 57.
**** Meaning see table / page 57.
***** Meaning see table / page 57.
******
The analogue 0…10 V output signal of SK 5xxE frequency inverters must be converted to 0/4…20 mA with a commercially
available external signal converter. As an alternative, an SK 54xE frequency inverter with an IO extension SK EBIOE-2
(275900210) can be used. For more information, refer to the Technical Information TI 275900210 (see www.nord.com ).
Table 37: Customer unit Multi I/O 20mA, SK CU1-MLT-20mA
Pos : 61 /---------- Seitenumbruc h ---------- @ 1\ mod_1329145698658_0.doc x @ 15891 @ @ 1