beautypg.com

5 emc kits for sk 5xxe frequency inverters, Emc kits for sk 5xxe frequency inverters, Figure 5: sk 500e with emc kit sk emc2-x – NORD Drivesystems MI0700 User Manual

Page 36: Information, Emc kit sk emc2-x

background image

Frequency inverters

– Migration Guide SK 700E to SK 5xxE

36

MI 0700 GB-0414

Pos : 42 /Migrati onsl eitf aden/ SK 700E - SK 500E/2. U ms etz ung/ 2. 5 EMV- Kits für SK 5xxE Frequenz umric ht er @ 3\ mod_1362477041410_388.doc x @ 61141 @ 2 @ 1

2.5 EMC kits for SK 5xxE frequency inverters

There are more optional components such as EMC kits for the SK 5xxE frequency inverters to ensure
optimum and EMC compliant cabling. The EMC kits are allocated to the respective sizes of the
SK 5xxE frequency inverters and come with shield bracket, two fastening screws and a pre-assembled
PE cables and must be ordered as an option. The shield brackets (without shield clamps) are mounted
on the housing as standard/ex factory of SK 700E frequency inverters of sizes 1 to 4 - in the
performance range from SK 700E-151-340-A (-RS2) to SK 700E-222-340-A (-RS2).

Figure 5: SK 500E with EMC kit SK EMC2-x

Size

SK 700E

Performance range

Size

SK 5xxE

Performance range

EMC kit

Name

Part No.

Size 1

SK 700E-151-340-

A … SK 700E-401-340-A *

Size 2

SK 700E-551-340-

A … SK 700E-751-340-A *

Size 3

SK 700E-112-340-

A … SK 700E-152-340-A *

Size 4

SK 700E-182-340-

A … SK 700E-222-340-A *

Sizes 1 + 2

SK 5xxE-151-340-

A … SK 5xxE-221-340-A

SK EMC2-1

275999011

Sizes 3 + 4

SK 5xxE-301-340-

A … SK 5xxE-751-340-A

SK EMC2-2

275999021

Size 5

SK 5xxE-112-340-

A … SK 5xxE-152-340-A

SK EMC2-3

275999031

Size 6

SK 5xxE-182-340-

A … SK 5xxE-222-340-A

SK EMC2-4

275999041

Size 7

SK 5xxE-302-340-

A … SK 5xxE-372-340-A

Size 7

SK 5xxE-302-340-

A … SK 5xxE-372-340-A

SK EMC2-5

275999051

Sizes 8 + 9

SK 5xxE-452-340-

A … SK 5xxE-902-340-A

Sizes 8 + 9

SK 5xxE-452-340-

A … SK 5xxE-902-340-A

SK EMC2-6

275999061

Sizes 10 + 11

SK 5xxE-113-340-

A … SK 5xxE-163-340-A

Sizes 10 + 11

SK 5xxE-113-340-

A … SK 5xxE-163-340-A

SK EMC2-7

275999071

*

Also applies to the SK

700E frequency inverters with optional “onboard” RS232 interface such as SK 700E-xxx-340-A-RS2.

These frequency inverters already come ex factory with shield bracket but without appropriate shield clamps.

Table 19: Overview of EMC kits for SK 5xxE frequency inverters

Information

EMC kit SK EMC2-x

The EMC Kit provides the possibility of attaching the screening of the motor cable to a large surface of the
frequency inverter (interference source). If necessary a screened brake resistor cable can be attached with the
second hammer clamp. The screening angle is attached to the two housing screws on the lower edge (below the
U-V-W terminals). The motor cable screening is earthed to a large area of the screening angle by means of the
hammer clamp. As an alternative, you can also use the EMC kit as a strain relief only (e.g. for connection cable of
a bus system) (heed bending radii!).

For more information and connection details, please refer to the operating instructions BU 0500 or BU 0505 (see

www.nord.com

) for the SK 5xxE frequency inverter series.