NORD Drivesystems MI0700 - Manual (Page 12)

Frequency inverters – Migration Guide SK 700E to SK 5xxE
12 MI 0700 GB-0414
1.2 frequency inverters overview
The assignment of the SK 700E frequency inverters dependent on function and rated power of the
devices is summarised below. The overview table below shows each of the customer units SK CU1-
xxx, extension units SK XU1-xxx and the two CAN or CANopen technology options SK TU1-CAN and
SK TU1-CAO for the SK 700E frequency inverter.
Additional functions of field bus systems or technology units (such as AS-Interface, PROFIBUS DP,
DeviceNet etc.) are listed in chapter 2.2.2 Field bus and communication technology units. The I/O
customer unit types SK CU1-xxx of the SK 700E series of frequency inverters are also described there
in greater detail.
Where needed, these different customer units are used to connect I/O control signals.
SK 700E
Performance levels
SK 5xxE
Name Name
SK 700E-xxx-340-X (-RS2) *
optional with integrated
RS232
1.5 kW … 7.5 kW / 2 hp … 10 hp SK 500E-xxx-340-A
11.0 kW … 160.0 KW / 15 hp … 220 hp SK 515E-xxx-340-A
SK 700E-xxx-340-X (-RS2) *
+ ENCODER
SK XU1-ENC
1.5 kW … 7.5 kW / 2 hp … 10 hp SK 520E-xxx-340-A
11.0 kW … 160.0 KW / 15 hp … 220 hp SK 535E-xxx-340-A
SK 700E-xxx-340-X (-RS2) *
+ POSICON
SK XU1-POS
1.5 kW … 7.5 kW / 2 hp … 10 hp SK 530E-xxx-340-A
11.0 kW … 160.0 KW / 15 hp … 220 hp SK 535E-xxx-340-A
SK 700E-xxx-340-X (-RS2) *
+ POSICON
SK XU1-POS
± SSI absolute encoder
+ IO customer unit
SK CU1-xxx **
1.5 kW … 7.5 kW / 2 hp … 10 hp
SK 540E-xxx-340-A
optional
SK EBIOE-2 ***
11.0 kW … 160.0 KW / 15 hp … 220 hp
SK 545E-xxx-340-A
optional
SK EBIOE-2 ***
SK 700E-xxx-340-X (-RS2) *
+ CAN Bus
SK CU1-CAN
1.5 kW … 7.5 kW / 2 hp … 10 hp
SK 511E-xxx-340-A
optional
WAGO-
adapter module
RJ45/terminal ****
11.0 kW … 160.0 KW / 15 hp … 220 hp
SK 515E-xxx-340-A
optional
WAGO-
adapter module
RJ45/terminal ****