Information, Operating manual, Nord software files – NORD Drivesystems MI0700 User Manual
Page 32
Frequency inverters
– Migration Guide SK 700E to SK 5xxE
32
MI 0700 GB-0414
Technology unit
SK TU1-xxx
Part No.
Name
Information
Data
Technology unit
SK TU3-xxx
Part No.
SK TU1-DEV
278200085
DeviceNet module
•
Baud rate: 500 kBps
•
5-pole terminal connector
•
PE shield clamp
•
with external 24 V power supply
via terminal
connector
•
BUS status and module status LEDs
•
rotary encoder switch for bus node address
and Baud rate
•
terminal resistor via DIP switch
SK TU3-DEV
275900085
SK TU1-IBS
278200065
InterBus module
•
Baud rate: 500 kBps, optional 2.0 MBps
•
2 x 9-pole SUB-D plug/socket
•
PE shield clamp
•
with external 24 V power supply
via 2-pole
terminal connector
•
BUS status and module status LEDs
•
rotary encoder switch for PPO type
SK TU3-IBS
275900065
SK TU1-AS1
278200170
AS interface module
•
Slave profile S7.4 (standard slaves)
•
1 x bus connection terminal connector,
5-pole
•
1 x IO / sensors and actuators
terminal
connector, 8-pole
•
with external 24 V (AUX) power
supply via
5-pole terminal connector
or also via 8-pole
IO terminal
connector
•
BUS status, AS-i IO sensor and actuator
status LEDs
SK TU3-AS1
275900170
Table 15: Field bus and communication technology units
Information
Operating Manual
For more information on the field bus and communication technology units listed in this chapter (RS232,
PROFIBUS DP, CAN, CANopen, etc.), refer to the separate bus-specific Operating Instructions BU 00xx (see
Information
NORD software files
The appropriate software files (GSD, EDS) are available for download in Internet (see
bus options which are available for the relevant options.
The software files for the SK 5xxE series of frequency inverters differ from those for the SK 700E series. For
further details please refer to chapter
Pos : 35 /---------- Seitenumbruc h ---------- @ 1\ mod_1329145698658_0.doc x @ 15891 @ @ 1