NORD Drivesystems MI0700 - Manual (Page 15)

2 Implementation
MI 0700 GB-0414 15
2 Implementation
Frequency inverters of the SK 5xxE series come in 10 different performance levels (SK 500E,
SK 505E, SK 510E, SK 511E, SK 515E, SK 520E, SK 530E, SK 535E, SK 540E, SK 545E). In
general, a distinction is made between SK 5x0E and SK 5x5E devices.
Sizes 1 to 4 of the SK 700E frequency inverters (1.5 kW to 22.0 kW) always come with a shield
bracket fitted to the frequency inverter housing. Shield clamps (size 8 to 35) specific to the cable cross
section and size are not supplied ex factory and, if necessary, will be provided and/or mounted by
persons charged with installation while fitting and setting up the SK 700E frequency inverters.
When migrating an application to the SK 5xxE series of frequency inverters you should always
provide for an additional EMC kit suitable for type SK EMC 2-x according to the size.
SK 700E types
Sizes 1 – 4 or performance levels ≤ 22.0 kW with
shield bracket for fitting shield clamps
Sizes ≥ 5 or ≥ performance levels 30.0 kW with shield
plate and shield clamps (KGM variant only)
Figure 3: SK 700E: different types (with shield bracket or shield plate)
Shield bracket for mounting shield clamps EMC kit SK EMC 2-x
Figure 4: SK 5xxE size-dependent EMC kits (with shield bracket, shield clamps, PE cable)
Information EMC kits SK EMC2-x
Chapter 2.5 provides an overview of SK EMC 2-x EMC kit available for the SK 5xxE frequency inverter
series specific to size.
Pos : 18 /Migrati onsl eitf aden/ SK 700E - SK 500E/2. U ms etz ung/ 2. 1 Fr equenzumric hter @ 2\ mod_1357222532792_388. doc x @ 52894 @ 2 @ 1
Shield bracket
Shield clamp
Shield bracket
PE cable
PE cable