NORD Drivesystems BU0210 - Manual (Page 55)

10 Additional information
BU 0210 GB Subject to technical amendments 55
10 Additional information
10.1 Maintenance and servicing information
In normal use, NORDAC SK 200E frequency inverters are maintenance free. Please note the "general data"
in Section 7.1.
If the frequency converter is being used in a dusty environment, then the cooling-vane surfaces should be
regularly cleaned with compressed air. If air intake filters have been built into the control cabinet, then these
should also be regularly cleaned or replaced.
If you contact our technical support, please have the precise device type (rating plate/display), accessories
and/or options, the software version used (P707) and the serial number (rating plate) at hand.
Repairs
The device must be sent to the following address if it needs repairing:
NORD Electronic DRIVESYSTEMS GmbH
Tjüchkampstraße 37
26605 Aurich, Germany
For queries about repairs, please contact:
Getriebebau NORD GmbH & Co. KG
Tel.: 04532 / 401-515
Fax: 04532 / 401-555
If a frequency inverter is sent in for repair, no liability can be accepted for any added components, e.g. such
as mains cables, potentiometer, external displays, etc.!
Please remove all non-original parts from the frequency inverter.
NOTE
If possible, the reason for returning the component/device should be stated. If necessary, at
least one contact for queries should be stated.
This is important in order to keep repair times as short and efficient as possible.
On request you can also obtain a suitable return goods voucher from Getriebebau NORD.