NORD Drivesystems BU0210 - Manual (Page 3)

SK 200E with "PosiCon Functionality" About this document
BU 0210 GB Subject to technical amendments 3
Documentation
Designation: BU 0210 GB
Part No.:
607 21 01
Device series: SK 205E, SK 215E, SK 225E, SK 235E
Device types: SK 2xxE-250-112-O ... SK 2xxE-750-112-O, 0.25 - 0.75kW, 1~ 100-120V, 230V version
SK 2xxE-250-123-A ... SK 2xxE-111-123-A, 0.25 - 1.1kW, 1~ 220-240V
SK 2xxE-250-323-A ... SK 2xxE-401-323-A, 0.25 - 4.0kW, 3~ 220-240V
SK 2xxE-550-340-A ... SK 2xxE-751-340-A, 0.55 - 7.5kW, 3~ 380-480V
Version list
Designation of previous issues Software
Version Comments
BU 0210 GB, May 2009
Part. No. 607 2101 / 2509
V 1.0 R0 First issue
Publisher
Getriebebau NORD GmbH & Co. KG
Rudolf-Diesel-Str. 1  D-22941 Bargteheide  http://www.nord.com/
Tel.: +49 (0) 45 32 / 401-0  Fax +49 (0) 45 32 / 401-555
Intended use of the frequency inverter
The compliance with the operating instructions is necessary for fault-free operation and
the acceptance of possible warranty claims. These operating instructions must be read
before working with the device!
These operating instructions contain important information about servicing. They must
therefore be kept close to the device .
SK 200E frequency inverters are devices for industrial and commercial plants for operating
three-phase asynchronous motors with squirrel-cage rotors. These motors must be suitable
for operation with frequency inverters, other loads must not be connected to the devices.
SK 200E frequency inverters are devices for fixed installation on motors or in equipment
close to the motor to be operated. All details regarding technical data and
permissible conditions at the installation site must be complied with.
Commissioning (starting of intended operation) is prohibited until it has been established that
the machine complies to the EMC guidelines 2004/108/EEC and the final product conforms to
Machine Guideline 98/37/EEC (also observe EN 60204).
 Getriebebau NORD GmbH & Co. KG, 2009