Milestone Analytics 2.2 Dacolian LPR - Manual (Page 30)

Milestone XProtect Analytics 2.2 – Dacolian LPR; Administrator’s Manual
www.milestonesys.com Page 30 Dacolian LPR Administrator
6. You now have a fully working version with which you can use as many connections as
allowed by your CLK:
Specifying New CLK to Extend Number of LPR
Connections
1. In the Administrator application, expand the License management folder.
2. Click the blue Entered CLK allows for # connections text to access the License management
features.
Tip: Note the MAC address
for this machine field. The
field lists the MAC (Media
Access Control) address of
the computer on which
XProtect Analytics is
installed. The MAC address
uniquely identifies the
computer. If you later need to get a new license—for example if you need to use more
cameras than covered by your original license—your Milestone vendor is likely to ask you
for the MAC address.
3. In the Connection License Key (CLK) field, overwrite the old CLK with the new one. Then
click the Set button.
4. Save your new settings by clicking the Save button in the Administrator application's
toolbar.
Note that when certain settings have changed, the server service
must be restarted. To verify whether this is required, look at the
server service status indicator in the bottom right corner of the Administrator application.
In case restart is required, click the Restart Server button in the Administrator
application's toolbar.
5. You can now use as many connections as allowed by your new CLK.