Milestone XProtect Express 2014 - Manual (Page 88)

Milestone XProtect ® Express 2014 Administrator's Manual
www.milestonesys.com 88 Advanced configuration
Name Description
On event
Select this check box to use the speedup frame rates when an
event occurs and until another event occurs. Use of speedup on
event requires that events (see "Overview of events and output" on
page 104) have been defined, and that you select start and stop
events in the neighboring lists.
Use the Configure events list, located below the other fields to
define events that suit your needs.
Start Event
Select required start event. The camera will begin using the
speedup frame rates when the start event occurs.
Stop Event
Select required stop event. The camera will return to the normal
frame rates when the stop event occurs.
Properties available in XProtect Enterprise and XProtect Professional only:
Live Frame Rate
Required average frame rate for live video from the camera. Select
number of frames, then select the time unit interval (second, minute
or hour). The frame rate must be higher than the frame rate
specified under normal mode.
If the camera supports dual stream and dual stream is enabled, the
Live Frame Rate column will be read-only with the value Dual
streaming
—which cannot be altered.
Recording Frame Rate
Required average frame rate for recorded video from the camera.
Select number of frames, then select the time unit interval (second,
minute or hour). The frame rate must be higher than the frame rate
specified under normal mode.
Tip: Speedup does not necessarily have to be based on motion- or events, you can also use
scheduling (see " Speedup " on page 129) to configure speedup based on particular periods of time. If
you prefer such time-based speedup, you should still enable the use of speedup by selecting the
Enable speedup check box.
Dual stream:
This feature is only available on cameras supporting dual stream.
Name Description
Enable dedicated live stream
This additional stream feature lets you use the alternative stream of
the camera. It enables two independent streams to the recording
server
—a stream for live viewing and another stream for recording
purposes, with different resolution, encoding, and frame rate.
Stream
Select the type of the live stream. Stream settings for viewing live
video and for recording video may very well be different in order to
get the best result.
Resolution Select the resolution of the camera.
FPS Select the camera's live frame rate per second (FPS)