Hoyles CELLPHONE DETECTOR Plus 610 - Manual (Page 8)

Specifications
Weight & Dimensions 0.4 kg - 200mm x 112mm x 50mm
Speaker Volume
User defined 0 – 82 dB
Batteries & Capacity 4 x "C" (not included). Lifespan of 12 months if typically 5 alarms per day.
External Power 6V DC nominal 500mA regulated supply. Connector is a long DC jack with 5.5mm
outer diameter, 2.1mm inner diameter. Inner is +ve, outer is -ve.
Audio Output 3.5mm mono jack, unbalanced signal approx 1V pk-pk (-10dB), signal to tip, 0V body.
Alarm Out 3.5mm mono jack, tip is signal output, ring is 0V. Signal is open collector type: high
impedance when not alarm, low impedance to 0V to signal alarm. Maximum input
voltage 24V, maximum sink current 50mA.
Terminal Blocks Pin 1 = Alarm Out (closest to batteries) Pin 3 = Audio Out
Pin 2 = 0V for Alarm Out and Audio Out Pin 5 = external 0V power input
(closest to USB and connectors)
Pin 4 = external 6V DC power input
Technical Support
Free technical support by telephone or email, is available during the lifetime of your product.
Kindly quote the product serial number, dealer name and date of purchase.
Telephone
Email:
[email protected]
This User Manual was released in March 2009.
Warranty
Starport International Limited (the Company) warrants that the Cellphone Detector Plus™ is free from defects in material and
workmanship at the time of shipment. The Company’s warranty applies to mechanical functionality only, and not to operational
performance due to site variables beyond the Company’s control. The warranty extends one year from order invoice date and covers
parts and labour. The buyer must provide written notice to the Company within the warranty period of any defect and return the device
to the Company within 30 days of this notice, at the buyers expense and risk, with the rear serial number label intact and legible.
Provided the defect is not the result of damage or mishandling that occurred within the buyer’s domain or control, the Company shall
either replace or repair the defective parts or replace the equipment or refund the purchase price at the Company’s option, after return
of the equipment to the Company. Equipment found not to be defective would be returned to the buyer at the buyer’s expense. Out of
warranty repairs will be invoiced at the regular Company hourly rate plus cost of any required components.
LIMITATION OF LIABILITY: the Company makes no representation with respect to the contents of this document and / or the contents,
performance and function of any accompanying product and specifically disclaims any warranties, expressed or implied, as to
merchantability, fitness for purpose sold, description or quality. Further, the Company reserves the right to revise or change this
document and the accompanying product from time to time without obligation to notify any party of such revisions or changes. This
document is provided “as is”. The Company shall not under any circumstances be responsible for any direct or indirect, special,
incidental or consequential damages or losses to the buyer or any third party arising out of or connected with the buyers purchase and
use of the Company’s products or services.
ST02CU11#1.03
Manufactured in the United Kingdom
8
01744 886600