Hoyles Yellow resettable DPCO call point IP67 - Manual

RESET KEY
(1) PROVIDED
OPERATING ELEMENT
FRONT COVER
WATERPROOF RESET CALL POINT
SURFACE MOUNTING BACK BOX
O RING
EARTHING STRAP
(PROVIDED)
20MM THREADED INSERT & WASHER
NB: M3.5 ALLEN FIXINGS
ALREADY INSTALLED
IN THE FRONT COVER
(6) PROVIDED
FIXINGS No.8 X 1”
(4) PROVIDED
Waterproof ReSet Call Point Series 01 & 11
The IP 67 Waterproof ReSet (WRP) has been designed to deal with today’s difficult and harsh environments. Like the ReSet Call Point
it is a unique fire alarm manual Call Point that mimics the feel of breaking glass whilst offering the user the benefits and safety
advantages of a glass-free resettable operating element. Once activated a warning flag drops in to view easily identifying the Call
Point that has been operated. A key can then reset the unit. The Waterproof ReSet provides an ideal solution for most conventional
fire alarm systems. Ideal for all outside applications such as oil rigs, ships, factory’s as well as wash down areas that are sensitive to
broken glass.
Waterproof ReSet
Series 01 Configuration
Connection Options for
Waterproof ReSet Call
Point Series 01
1 1
2 2 control panel
Option 1 terminals 1 & 2
Normally open switch closing on
alarm
680
4
1
680
1
4 control panel
470
3
1
470
1
3
control panel
Option 2 terminals 1 & 3
Normally open switch closing on
alarm with a 470 ohm resistor fitted
in series with the switch
Option 3 terminals 1 & 4
Normally open switch closing on alarm
with a 680 ohm resistor fitted in series
with the switch
680 470
REAR VIEW
SHOWING TERMINALS
Dia A
Dia B
Dia C
see note
over
1 2
3 5
6 4
RECOMMENDED
TIGHTENING SEQUENCE
5.0mm
64.8mm
O
74.9mm
84.7mm
Dia D
BACK BOX
IMPORTANT NOTICE
RESET KEY
(1) PROVIDED
OPERATING ELEMENT
FRONT COVER
WATERPROOF RESET CALL POINT
SURFACE MOUNTING BACK BOX
O RING
EARTHING STRAP
(PROVIDED)
20MM THREADED INSERT & WASHER
NB: M3.5 ALLEN FIXINGS
ALREADY INSTALLED
IN THE FRONT COVER
(6) PROVIDED
FIXINGS No.8 X 1”
(4) PROVIDED
Waterproof ReSet Call Point Series 01 & 11
The IP 67 Waterproof ReSet (WRP) has been designed to deal with today’s difficult and harsh environments. Like the ReSet Call Point
it is a unique fire alarm manual Call Point that mimics the feel of breaking glass whilst offering the user the benefits and safety
advantages of a glass-free resettable operating element. Once activated a warning flag drops in to view easily identifying the Call
Point that has been operated. A key can then reset the unit. The Waterproof ReSet provides an ideal solution for most conventional
fire alarm systems. Ideal for all outside applications such as oil rigs, ships, factory’s as well as wash down areas that are sensitive to
broken glass.
Waterproof ReSet
Series 01 Configuration
Connection Options for
Waterproof ReSet Call
Point Series 01
1 1
2 2 control panel
Option 1 terminals 1 & 2
Normally open switch closing on
alarm
680
4
1
680
1
4 control panel
470
3
1
470
1
3
control panel
Option 2 terminals 1 & 3
Normally open switch closing on
alarm with a 470 ohm resistor fitted
in series with the switch
Option 3 terminals 1 & 4
Normally open switch closing on alarm
with a 680 ohm resistor fitted in series
with the switch
680 470
REAR VIEW
SHOWING TERMINALS
Dia A
Dia B
Dia C
see note
over
1 2
3 5
6 4
RECOMMENDED
TIGHTENING SEQUENCE
5.0mm
64.8mm
O
74.9mm
84.7mm
Dia D
BACK BOX
IMPORTANT NOTICE