FUTEK IPM52x (D520) Digital Display - Manual (Page 25)

24
b. "OUT" selects what the analog output will be
• "4-20" 4-20mA
• "0-10" 0-10VDC
• "0-20" 0-20mA
• "0-5" 0-5VDC
• "-5 +5" -5 to +5VDC
c. "DSP Lo" enter what the low display value that will represent
the low analog output value
d. "DSP HI" enter what the high display value that will represent
the high analog output value
SECTION 3.9: DISPLAY SETUP PROGRAMMING
BRANCH
"FILTER"/"SNAP" - "FILTER" AND "SNAP" work together to provide a
digital filter. The filter is applied to both Channel 1 and Channel 2 inputs.
The NO filter setup is
"FILTER"= 1.000, "SNAP"=0.000
The Filter formula is active only when New Reading < Old Reading +/-
Snap Value.
New Display Reading = (Old Reading + (Filter (New Reading- Old)))
SECTION 3.10: SPECIAL FEATURES PROGRAMMING
BRANCH
Use SELECT key to choose which function you wish to program. Then
press ENTER key.